DTF Heat Press Instructions

Heat Press Instructions

How to Apply Your DTF Transfers

Follow these simple instructions to achieve the best results with your DTF transfers. Using the correct heat press settings ensures a vibrant, durable, and long-lasting print.

 

 

Before You Start

Before pressing, make sure:

  • Garment is clean and dry

  • Heat press is set to the correct temperature

  • Pressing surface is flat and even

  • Pre-press the garment for 5 seconds to remove moisture and wrinkles

 

 

Recommended Heat Press Settings

Setting

Recommendation

Temperature

300°F (150°C)

Pressure

Medium to Firm

Press Time

10–15 Seconds

Peel

Cold Peel

Note: Heat press settings may vary depending on your machine and fabric. Always test before large production runs.

 

 

Application Steps

Step 1 – Position the Transfer

Place the DTF transfer on the garment with the printed side facing down in the desired location.

Step 2 – Heat Press

Press at 300°F (150°C) using medium to firm pressure for 10–15 seconds.

Step 3 – Let It Cool

Allow the transfer to cool completely before peeling the film.

Step 4 – Cold Peel

Slowly peel the carrier film away from the garment.

Step 5 – Final Press

Cover the design with parchment paper or a Teflon sheet and press again for 5–10 seconds. This improves durability and gives the print a smooth, professional finish.

 

 

Washing Instructions

To keep your custom apparel looking its best:

  • Wait 24 hours before the first wash

  • Wash garments inside out

  • Use cold water

  • Use a mild detergent

  • Do not use bleach

  • Tumble dry on low heat or hang dry

  • Do not iron directly on the printed design

 

 

Compatible Fabrics

Our DTF transfers work great on:

  • 100% Cotton

  • Polyester

  • Cotton/Poly Blends

  • Canvas

  • Performance Fabrics

 

 

Need Assistance?

If you have any questions about applying your DTF transfers or need help with your order, our team is here to help.

📞 Phone: (548) 388-5228

📧 Email: teesandtops@outlook.com